Elia SG02

Barstool with upholstered backrest. Crafted from FSC-certified, bent ash wood. Designed by Marco Zito.

Elia SG01

Barstool with bent ash backrest. Designed by Marco Zito and crafted from FSC-certified wood.

Elia PO03

Wider armchair with a bent ash wood frame and an upholstered seat. Designed by Marco Zito and made with FSC-certified wood.

Elia PL01

Lounge chair with wooden frame and upholstered seat and backrest. Beautifully crafted from FSC-certified bent ash wood. Designed by Marco Zito.

Elia SE01

Wooden side chair, crafted from FSC-certified bent ash wood. Upholstered seat and backrest. Designed by Marco Zito.

Arisa PL01

Lounge chair with solid-wood armrests and legs made of FSC-certified beech.

LEA OD 3.3

Stackable outdoor barstool featuring UV-resistant polypropylene. These Greenguard Gold-certified stools can stack 8 units high. Made of 53% recycled materials. Designed by Perezochando.

LEA OD 1.3

Stackable outdoor chair featuring UV-resistant polypropylene. These Greenguard Gold-certified side chairs can stack 8 units high, and up to 12 units on a trolley. Made of 45% recycled materials. Designed by Perezochando.

FLOE FLO0340

Side/laptop table with oval tabletop measuring 58cm x 36cm/22.8″ x 14.2″. Aluminum base and height of 66cm/26″. Plastic glides as standard.

FLOE FLO0210

Height-adjustable side table with 40cm/15.7″ square tabletop. Using the gas lift column, the height ranges from 55cm/21.7″ to 77cm/30.3″. Aluminum base. Plastic glides as standard. Designed by Pearson Lloyd.

FLOE FLO0010

Low side table at 40cm/15.7″ height, with 40cm/15.7″ square tabletop. Aluminum central column and base plate. Plastic glides as standard. Designed by Pearson Lloyd.

Cono 4004 D32

Coffee table with conical metal base and 80cm/32″-diameter table top. 45cm/17.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4004 D28

Coffee table with conical metal base and 70cm/28″-diameter table top. 45cm/17.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4004 D24

Coffee table with metal base and 60cm/24″-diameter table top. 45cm/17.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4003 D32

Side table with conical metal base and 80cm/32″-diameter table top. 55cm/21.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4003 D28

Side table with conical metal base and 70cm/28″-diameter table top. 55cm/21.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4003 D24

Side table with conical metal base and 60cm/24″-diameter table top. 55cm/21.75″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4002 D48

Dining table with wider metal base and table top measuring 120cm/48″ in diameter. 75cm/29.5″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4002 D40

Dining table with wider metal base and table top measuring 100cm/40″ in diameter. 75cm/29.5″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4002 D36

Dining table with wider metal base and table top measuring 90cm/36″ in diameter. 75cm/29.5″ high. The round table top is available in woodgrain or a lacquered finish, with a reverse knife edge profile. Other profiles and materials available by special request.

Cono 4001 D40

Dining table with metal base. 100cm/40″-diameter table top in woodgrain or lacquered finish, with a reverse knife edge profile. 75cm/29.5″ high. Other top profiles/materials available by special request.

Cono 4001 D36

Dining table with metal base. 90cm/36″-diameter table top in a woodgrain or lacquered finish, with a reverse knife edge profile. 75cm/29.5″ high. Other top profiles/materials available by special request.

Cono 4001 D32

Dining table with metal base. 80cm/32″-diameter table top in a woodgrain or lacquered finish, with a reverse knife edge profile. 75cm/29.5″ high. Other top profiles/materials available by special request.

Star 9.1

Two-sided, fully upholstered sofa. With a wooden frame and webbed seat, guests can comfortably sit on any side of this unique piece.

Charlotte 112

Small rectangular ottoman. This American-made piece is part of the Charlotte modular seating series.

Charlotte 111

Long rectangular ottoman in the Charlotte modular seating series. Made in the U.S.

Charlotte 110

Large square ottoman in the Charlotte modular seating series. Made in the U.S.. 33″/84cm sq.

Charlotte 109

Modular bench, made in U.S.. This backless seat is part of the Charlotte modular seating series.

Charlotte 108

Convex seat in the American-made Charlotte modular seating series. Can be used to form circular sofa configurations.

Charlotte 104

Two-seat sofa element with right armrest. Wood frame, made in America.

Charlotte 106

One-seat element in the Charlotte series of American-made modular seating.

Charlotte 103

Two-seat sofa element with left armrest. Wood frame, made in America.

Charlotte 101

Two-seat unit with right-hand backrest in the Charlotte modular sofa series. Wooden frame. Made in America.

Cono 4004

Metal coffee table base at 45cm/17.75″ high, available in pearl gold, black, or lacquered finishes. Maximum tabletop size: 80cm/32″ diameter

Oswell 4.4

Counter stool with wood legs and a seat pad for added comfort. FSC-certified oak wood, Greenguard Gold-certified.

Oswell 3.2

Stacking barstool with steel legs and a seat pad. This Greenguard Gold-certified stool stacks up to 6 units high and is made from 43% recycled materials.

Oswell 1.2

Stacking side chair made of ridged polypropylene with seat pad. Steel legs. Greenguard Gold-certified to have a minimal impact on indoor air quality.

Oswell 1.1

Stackable side chair with seat pad. This sled-based chair stacks up to 40 units high on the OSW0122OP trolley. Greenguard Gold-certified to protect indoor air quality.

Oswell OD 3.2 PP

Stacking outdoor barstools made of UV-resistant polypropylene and 44% recycled materials. Non-slip texture, Greenguard Gold-certified.

Oswell OD 1.1 PP

Stacking outdoor chair made of ridged UV-resistant polypropylene that has a non-slip texture. These side chairs are Greenguard Gold-certified and one-third of their materials are recycled. Designed by Nacar Design.