BARLIS 130

Flip-top table base at bar height. This sustainable table, made of lightweight aluminum alloy, is composed of 64% recycled materials. Can be combined with the following table tops:

Round: 70cm/28″ in diameter
Square: 60cm/23.6″ sq. and 70cm/28″ sq.

BARLIS 120

Sustainable, standard dining height table base with flip-top mechanism for easy storage. Made with aluminum alloy and 69% recycled materials. Suitable table tops:

Round: 70cm/28″, 80cm/32″, and 90cm/36″ in diameter
Square: 60cm/23.6″ sq., 70cm/28″ sq., and 80cm/32″ sq.

BARLIS 030

Lightweight, sustainable table base at bar height. Made with aluminum alloy and contains recycled materials. This base can be combined with the following table tops:

Round: 70cm/28″ and 80cm/32″ in diameter
Square: 60cm/23.6″ sq. and 70cm/28″ sq.
Oval: 180cm x 90cm/70″ x 35.4″ with two bases
Rectangle: 140cm/70.8″ x 70cm/35.4″ and 160cm/62.9″ x 80cm/31.5″ with two bases

BARLIS 020

Standard-height table base for meetings or dining. This lightweight base is made of aluminum alloy using 31% recycled materials. Works with the following table tops:

Round: 70cm/28″, 80cm/32″, and 90cm/36″ in diameter
Square: 60cm/23.6″ sq., 70cm/28″ sq., and 80cm/32″ sq.
Oval: 180cm x 90cm/70″ x 35.4″ with two bases
Rectangle: 140cm/70.8″ x 70cm/35.4″ with two bases

BARLIS 010

Lightweight occasional table base. This sustainable base is made of aluminum alloy, and 35% of the materials are recycled. For the following table tops:

Round: 70cm/28″, 80cm/32″, and 90cm/36″ in diameter
Square: 60cm/23.6″ sq., 70cm/28″ sq., and 80cm/32″ sq.

Zelda Trolley

This trolley can hold five Zelda chairs, or seven with the addition of dividing panels.

FLOE FLO0420

Aluminum dining/meeting table base made of 47% recycled materials. 73.5cm/28.9″ high. Plastic glides as standard. Suitable tabletops:

Round: 70cm/27.6″, 80cm/31.5″, or 90cm/35.4″ diameter
Square: 60cm/23.6″ sq.,70cm/27.6″ sq., or 80cm/31.5″ sq.
Oval: 180x90cm*/70.9″x35.4″*. Requires two bases.
Rectangular: 140x70cm/55″x27.6″ or 160x80cm/63″x31.5″. Requires two bases.

*A counterweight is recommended for these tabletop sizes.

FLOE FLO0410

Aluminum occasional table base made of 50% recycled materials. 38.5cm/15.2″ high. Plastic glides as standard. Suitable tabletops:

Round: 70cm/27.6″, 80cm/31.5″, or 90cm/35.4″ diameter
Square: 60cm/23.6″ sq.,70cm/27.6″ sq., or 80cm/31.5″ sq.
Oval: 110cm/43″ x 60cm*/23.6″*

*A counterweight is recommended for these tabletop sizes.

FLOE FLO0430

Aluminum bar table base made of 43% recycled materials. 103.5cm/40.7″ high. Plastic glides as standard. Suitable tabletops:

Round: 70cm/27.6″ or 80cm*/31.5″* diameter
Square: 60cm/23.6″ sq. or 70cm*/27.6″* sq.
Oval: 180x90cm*/70.9″x35.4″*. Requires two bases.
Rectangular: 140x70cm/55″x27.6″ or 160x80cm*/63″x31.5″*. Requires two bases.

*A counterweight is recommended for these tabletop sizes.

Cono 4004

Metal coffee table base at 45cm/17.75″ high, available in pearl gold, black, or lacquered finishes. Maximum tabletop size: 80cm/32″ diameter

Cono 4003

Metal side table base at 55cm/21.75″ high, available in pearl gold, black, or lacquered finishes. Maximum tabletop size: 80cm/32″ diameter

CAMPUS TROLLEY

Trolley for use with Campus chairs

A22 4.2

Counterstool. Frame of Ø 25 & 20 mm powder coated steel tube. Seat of 3mm perforated sheet steel. Loose reversible cushion as an option. Glides. Stackable.

A22 3.2

Barstool. Frame of Ø 25 & 20 mm powder coated steel tube. Seat of 3mm perforated sheet steel. Loose reversible cushion as an option. Glides. Stackable.

A22 3.1

Frame of Ø 25 & 20 mm powder coated steel tube. Seat of 3mm perforated sheet steel. Loose reversible cushion as an option. Glides. Stackable.

Oswell Trolley 1.0

Transport trolley that carries up to 15 non-sled base Oswell chairs.

Oswell Trolley 2.0

Transport trolley for sled-based Oswell chairs. Capable of carrying up to 40 units.

ESCALAS 0520

Central legs for the Escalas modular seating series. Designed to join two structural frames with the same pair of legs. Steel with epoxy coating.

KER0840

Set of four legs with caster wheels for Kern modules.

KER0850

Set of four legs with caster wheels for curved Kern modules.

KER0810UN

Set of 2 linking brackets for the Kern modular series.

KER0890

Mount for TV/monitor for Kern configurations.

LAP0600OP CONNECTING PLATE

Connecting plate for Lapse units

LAPSE 0010

Steel tube frame for 1 seater modular sofa in epoxy finish.

LAPSE 0018

Steel tube frame for 1.5 seater modular sofa in epoxy finish.

LAPSE 0015

Frame suited for the concave / convex seat sections finished in epoxy finish.

LAPSE 0020

2-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0025

2.5-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0030

3-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0035

3.5-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0040

4-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0045

4.5-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0050

5-seat frame in the Lapse modular seating range that can be customized with a variety of modular elements and epoxy finishes. Click on range Components below for full selection. Seats and legs specified separately.

LAPSE 0100

Steel legs for Lapse, in epoxy finish.

LAPSE 0120

Steel legs for steel frames for Lapse benches range, in epoxy finish.

LAPSE 0140

Steel middle connection leg for modular sofas, in epoxy finish.
It replaces 2 side legs when connecting 2 frames.

MT 591T

Table base. Available in powdercoat and painted finishes.
Optional upcharge for outdoor version with galvanized-treated frame and adjustable feet.

Recommended table top sizes:
70 x 120cm – 28″ x 48″
70 x 130cm – 28″ x 52″
70 x 140cm – 28″ x 56″
80 x 120cm – 32″ x 48″
80 x 130cm – 32″ x 52″
80 x 140cm – 32″ x 56″
Base Spread:
39.7 x 74.7cm – 15⅔” x 29½”

Please note: Minimum order quantity for custom height 25 pcs.
Please note: The base does not include adjustable glides.

MT 581

Table base. Available in powdercoat painted finishes.
Optional upcharge for outdoor version with galvanized-treated frame and adjustable feet.

Recommended table top sizes:
Square:
60 x 60cm – 24″ x 24″
70 x 70cm – 28″ x 28″
Round:
60cm – 24″
70cm – 28″
Base Spread:
42.1cm – 17″

Please note: For rectangular table tops, two table bases may be required for added support.

Minimum order quantity for custom height 25 pcs.
Please note: The base does not include adjustable glides.

MT 582A

Table base. Available in powdercoat painted finishes.
Optional upcharge for outdoor version with galvanized-treated frame and adjustable feet.

Recommended table top sizes:
Square:
70 x 70cm – 28″ x 28″
Round:
80cm – 32″
90cm – 36″
Base Spread:
50.5cm – 20″

Please note: For rectangular table tops, two table bases may be required for added support.

Minimum order quantity for custom height 25 pcs.
Please note: The base does not include adjustable glides.

MT 582

Table base. Available in powdercoat painted finishes.
Optional upcharge for outdoor version with galvanized-treated frame and adjustable feet.

Recommended table top sizes:
Square:
80 x 80cm – 32″ x 32″
90 x 90cm – 36″ x 36″
Round:
80cm – 32″
90cm – 36″
100cm – 40″
Base Spread:
50.5 cm – 20″

Minimum order quantity for custom height 25 pcs.
Please note: The base does not include adjustable glides.